Services Available |
---|
WindSonic4-LC是二维超声anemometer for measuring wind speed and direction. This version of the WindSonic4 has a connector instead of pigtails that attaches to the the MetData1 Weather Station.
WindSonics are manufactured by Gill Instruments Ltd.
Read MoreThe "-LC" version of this product terminates in a connector (instead of pigtails) for use with a CS110 Electric Field Meter or MetData1 Weather Station. The length of the cable is specified at the time of order.
The WindSonic4-LC uses two pairs of orthogonally oriented transducers to sense the horizontal wind. The transducers bounce the ultrasonic signal from a hood, thus minimizing the effects of transducer shadowing and flow distortion.
Unlike mechanical anemometers, the WindSonic4-LC has no moving parts to be periodically replaced—minimizing routine maintenance costs.
The WindSonic4-LC outputs an SDI-12 signal that is read by the MetData1's on-board CR10XM module.
Operating Humidity | < 5% to 100% RH |
Operating Temperature | -35° to +70°C |
Storage Temperature | -40° to +80°C (typical) |
Input Voltage | 9 to 30 Vdc |
Typical Current Drain | < 10 mA (@ 12 V) |
Measurement Frequency | 40 Hz block averaged to a 1 Hz output frequency |
Outputs Parameters | Polar (direction and speed) or orthogonal (Uxand Uywind) |
Output Signal | SDI-12 version 1.3 |
Diameter | 14.2 cm (5.6 in.) |
Weight | 0.5 kg (1.1 lb) |
Maximum Cable Length |
|
-NOTE- | For longer cable lengths, contact an applications engineer at Campbell Scientific. |
1 Sensor Connected to 1 Port | 91.44 m (300 ft) |
2 to 10 Sensors Connected to 1 Port | 60.91 m (200 ft) |
Wind Direction |
|
Range | 0º to 359° (no dead band) |
Accuracy | ±3° |
Resolution | 1° |
Wind Speed |
|
Range | 0 to 60 m/s |
Accuracy | ±2% (@ 12 m/s) |
Resolution | 0.01 m/s |
Number of FAQs related toWINDSONIC4-LC:3
Expand AllCollapse All
Most Campbell Scientific sensors are available as an –L, which indicates a user-specified cable length. If a sensor is listed as an –LX model (where “X” is some other character), that sensor’s cable has a user-specified length, but it terminates with a specific connector for a unique system:
If a sensor does not have an –L or other –LX designation after the main model number, the sensor has a set cable length. The cable length is listed at the end of the Description field in the product’s Ordering information. For example, the 034B-ET model has a description of “Met One Wind Set for ET Station, 67 inch Cable.” Products with a set cable length terminate, as a default, with pigtails.
If a cable terminates with a special connector for a unique system, the end of the model number designates which system. For example, the 034B-ET model designates the sensor as a 034B for an ET107 system.
Not every sensor has different cable termination options. The options available for a particular sensor can be checked by looking in two places in the Ordering information area of the sensor product page:
If a sensor is offered in an –ET, –ETM, –LC, –LQ, or –QD version, that option’s availability is reflected in the sensor model number. For example, the 034B is offered as the 034B-ET, 034B-ETM, 034B-LC, 034B-LQ, and 034B-QD.
All of the other cable termination options, if available, are listed on the Ordering information area of the sensor product page under “Cable Termination Options.” For example, the 034B-L Wind Set is offered with the –CWS, –PT, and –PW options, as shown in the Ordering information area of the 034B-L product page.
Note:As newer products are added to our inventory, typically, we will list multiple cable termination options under a single sensor model rather than creating multiple model numbers. For example, the HC2S3-L has a –C cable termination option for connecting it to a CS110 instead of offering an HC2S3-LC model.
Many Campbell Scientific sensors are available with different cable termination options. These options include the following:
Note:The availability of cable termination options varies by sensor. For example, sensors may have none, two, or several options to choose from. If a desired option is not listed for a specific sensor, contact Campbell Scientific for assistance.
We've updated our privacy policy.Learn More