This product is no longer available and has been replaced by:ST-21.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
The ST-20 Argos Satellite Transmitter was well suited for remote meteorological and environmental data collection applications, including mobile and high-latitude installations. While Campbell Scientific's ST-20 Argos PTT was based on Telonics' ST-20, they were not equivalent; our ST-20 included a case, voltage regulator, and our SDC communication interface.
阅读更多Images
Detailed Description
Campbell Scientific's ST-20 was a Service Argos-certified Platform Transmitter Terminal (PTT ) that transferred data from the data logger site to the Argos Data Collection and Location System via NOAA polar orbiting satellites.
Please note that when ordering the transmitter, the customer needed to provide Campbell Scientific with the number of buffers, repetition rate, decimal ID, Dex ID, frequency, and fail safe information.
Note:
While Campbell Scientific's ST-20 Argos PTT was based on Telonics' ST-20, they were not equivalent; our ST-20 included a case, voltage regulator, and our SDC communication interface.
Specifications
| Supply Voltage | 12 V, nominal |
| Output Impedance | 50 ohm |
| High Power Level | 800 mW typical; 27 to 31 dbm |
| Argos Transmission Frequency | 401.618 to 401.680 MHz |
| Modulation (BPSK) | -1.1 to +1.1 ±0.1 radians |
| Current Drain at 12 Vdc |
|
| Spurious Emissions | -45 dB |
| Dimensions | 19.05 x 5.72 x 3.18 cm (7.5 x 2.25 x 1.25 in.) |
| Weight | 224 g (7.9 oz) |
Compatibility
Note:The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Data Loggers
| 产品 | Compatible | Note |
|---|---|---|
| CR1000(retired) | ||
| CR200X(retired) | ||
| CR206X(retired) | ||
| CR211X(retired) | ||
| CR216X(retired) | ||
| CR295X(retired) | ||
| CR3000(retired) | ||
| CR5000(retired) | ||
| CR800 | ||
| CR850 | ||
| CR9000X(retired) |
Additional Compatibility Information
Enclosure Considerations
The ST-20 requires a desiccated, non-condensing environment; a Campbell Scientific enclosure is recommended. Grommets and screws are provided to attach the ST-20's flanges to the backplate of our enclosures.
Documents
Brochures
Privacy Policy Update
We've updated our privacy policy.Learn More