Overview
The SP5-L is a 5 W solar panel that is typically used as a recharging source with our CR300-series dataloggers, as well as our CRVW3. It may be suitable for use with other data loggers, provided that the system's power recharge requirements are low enough. The SP5-L cable has a user-specified lead length that terminates in pigtails to attach directly to the terminal strip of the data logger.
Read MoreBenefits and Features
- Supplies electrical power in locations where ac power is unreliable, expensive, or not available
The "-L" on a product model indicates that the cable length is specified at the time of order.
Images
Detailed Description
The SP5-L solar panel captures solar energy via a 72 in.2surface area. It is only suitable for systems with low power requirements. Sites must also have good exposure to sunlight.
The SP5-L differs from the SP5 only in its cable termination. The SP5-L cable terminates in pigtails that attaches either to the data logger's terminals or a standard power supply. In contrast, the SP5 cable terminates in a connector for attachment to the ENC200 enclosure.
Included mounting hardware consists of one part no. 17492 U-bolt and matching nuts. The U-bolt has a 5.398 cm (2.125 in.) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75-1.5 in. IPS pipe [25.4-50.8 cm (1-2 in.) OD].
Specifications
| -NOTE- | Solar panel characteristics assume 1 kW m-2illumination and 25°C solar panel temperature.Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases. |
| Cable Description | 20 AWG, 1-twisted pair |
| Maximum Peak Power | 4.5 W |
| Voltage at Peak | 16.5 V |
| Current at Peak | 0.27 A |
| On-board Regulator Included | No |
| Cable Length | 0.91 m (3 ft) |
| Dimensions | 25.1 x 26.9 x 2.3 cm (9.9 x 10.6 x 0.9 in.) |
| Weight | 0.9 kg (2 lb) |
Compatibility
Note:The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Data Loggers
| Product | Compatible | Note |
|---|---|---|
| CR300 | (The SP5-L is compatible with the built-in regulator.) | |
| CR310 | (The SP5-L is compatible with the built-in regulator.) | |
| CRVW3 | (The SP5-L is compatible with the built-in regulator.) |
Additional Compatibility Information
Regulators
The SP5-L is compatible with regulators built into the CRVW3, CR300-series dataloggers, or the CR200X-series dataloggers.
Batteries
The SP5-L is compatible with the BP7 (pn 17365) 12 V 7 Ah Sealed Rechargeable Battery with Mounts and Pigtail or other 12 V EnerSys Genesis NP series (such as PS150, PS200, BP12, BP24), EnerSys Cyclone series, or Concorde Sun Xtender series (such as BP84) batteries.
Documents
Videos & Tutorials
经常问什么estions
Number of FAQs related toSP5-L:1
-
Regulators control the current flowing to the battery and prevent the battery current from flowing to the charging source. These solar panels do not include an on-board voltage regulator, so a stand-alone regulator would be required to complete a power supply.
Typically, these solar panels are connected to a CH100, CH200, PS100, or PS200, as well as to the battery base of a CR3000 or CR5000. The PS100 and the PS200, as well as the battery base of the CR3000 and CR5000, include an internal regulator.
Listed Under
Privacy Policy Update
We've updated our privacy policy.Learn More