RETIRED ›
This product is no longer available and has been replaced by:RF500M.
RF310M RF Modem
Services Available
Repair No
Calibration No
Free Support No

Overview

The RF310M functions as the communication interface between a data logger and an RF310, RF312, or RF313 radio. Extended temperature testing is available for extreme environments.

Read More

Images

Detailed Description

The RF310M functions as the communication interface between a mixed-array data logger and an RF310, RF312, or RF313 radio. It's typically powered with the 5 Vdc provided by the data logger's CS I/O port. When the modem is at a non-data-logger repeater site, a PS100 Power Supply fitted with an A100 adapter is used to power the RF310M. Each RF310M contains dip switches that allow the user to address the modem with a number between 0 and 255.

Specifications

Power 35 mA at 5 Vdc (from pin 1 on the data logger's CS I/O 9-pin connector)
Standard Operating Temperature Range -25° to +50°C
Extended Operating Temperature Range -55° to +70°C
Dimensions
  • 16.3 x 8.4 x 2.5 cm (6.4 x 3.3 x 1.0 in.) without mounts
  • 17.3 x 11.9 x 2.5 cm (6.8 x 4.7 x 1.0 in.) with mounts and connectors
Weight 227 g (8 oz)

Compatibility

Note:The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Data Loggers

Product Compatible Note
21X(retired)
CR10(retired)
CR1000(retired)
CR10X(retired)
CR200X(retired)
CR206X(retired)
CR211X(retired)
CR216X(retired)
CR23X(retired)
CR295X(retired)
CR3000(retired)
CR500(retired)
CR5000(retired)
CR510(retired)
CR800
CR850
CR9000(retired)
CR9000X(retired)

Additional Compatibility Information

Radios, Radio Modems, and Radio Base Stations

The RF310M is compatible with the RF310-series radios, the RF310B Base Station (retired), the RF500M Radio Modem, and the RF500B Base Station. If RF310M modems are used in a network containing RF500M modems or RF500B base stations then the RF310M modems must use the -TD PROM; the data loggers must also support PakBus (e.g., CR10X-PB, CR1000).

The RF310M is not compatible with our RF300-series radios, RF95A radio modems, RF315 radio modems, RF232(A) base stations, and PS232 base stations. Retired radios and radio modems (e.g., P50, RF100, RF95) are also not compatible with the RF310M.

Data Logger Considerations

Time division polling and PakBus communications can be used in the same network as long as all of the data loggers are PakBus versions.

经常问什么estions

Number of FAQs related toRF310M:2

  1. Is it possible to use the CR1000KD to connect to remote RF stations using an RF modem and a radio?

    No. The CR1000KD is designed specifically for use on the CS I/O port of the CR800, CR1000, and CR6 dataloggers.

  2. Can a CR10X and an RF modem be wired directly without using an SC932A?

    If the RF modem has a CS I/O connector, then it should be compatible with the CR10X without the use of an SC932A. Ensure that the RF modem’s firmware is compatible with the CR10X firmware.

    Note:RF modems that are not sold by Campbell Scientific will only interface with a CR10X via an SC932A or an SC105.

Privacy Policy Update

We've updated our privacy policy.Learn More

Baidu