Services Available |
---|
The RAWS-P is a CR1000-based weather station that combines flexibility with ease of use. With the RAWS-P, sensors and mounting peripherals are purchased separately--allowing you to customize your station exactly the way you want it.
Even with this flexibility, however, installation is easy because the selected sensors are simply attached to color-coded, keyed connectors on the outside of the RAWS-P enclosure. Besides the connectors, a wiring panel is provided that allows the attachment of additional sensors.
Read MoreOur RAWS-P is the core of a permanent station designed for a wide range of mounting options and for ease of configuration. Each RAWS-P station is preprogrammed to monitor wind speed and direction, air temperature and relative humidity, precipitation, barometric pressure, and solar radiation sensors. This program complies with the National Fire Danger Rating System (NFDRS) weather station standards.
A RAWS-P consists of a CR1000 datalogger and 12-V battery, housed and protected in an aluminum environmental enclosure that can be mounted in a variety of ways. Sensors and power source are purchased separately. The sensors can be chosen from those with an -LQ suffix; this designates sensors built with cable ends that will fit the RAWS-P enclosure connectors.
The battery is recharged via a solar panel or an AC transformer. To facilitate sensor connection, the outside of the enclosure has color-coded, keyed connectors. A wiring panel is also provided, allowing the RAWS-P to measure additional sensors.
The RAWS-P typically communicates via our GOES satellite transmitter. It is also compatible with other communication equipment such as telephones, digital cellular transceivers, and radios.
-NOTE- | CR1000 specifications are provided ontheCR1000 web page. |
Enclosure Material | Aluminum |
Connector Descriptions | Color-coded keyed connectors for attaching sensors. |
Enclosure Mounts | Options available for mounting to a tripod mast or tower leg (see Ordering Info) |
Enclosure Dimensions | 35.6 x 45.7 x 22.9 cm (14.0 x 18.0 x 9.0 in.) |
Enclosure Weight | 12.6 kg (27.75 lb) fully loaded, which includes the CR1000M, connector panel, and 7 Ahr battery |
The following sensors can be attached to the connector panel.
Connector Label | Compatible Sensors (one sensor per connector) |
WS/WD | 034B-LQ |
FM/FT | CS516-LQ |
Temp/RH | HC2S3-L(choose the -RQ cable termination option) |
PRECIP | TE525-L, TE525WS-L(choose the -RQ cable termination option) |
SDI-12 | WINDSONIC4-LQ |
SOLAR RAD SDI-12 |
CS300-LQ |
The CS100-QD barometric pressure sensor is also compatible. It is mounted inside of the RAWS environmental enclosure and the sensor wires are attached to the CR1000 printed circuit board wiring panel.
The following can be used to recharge the internal battery.
Connector Label | Compatible Device (choose one) |
充电器/垫 SOLAR PANEL |
18897 wall charger, SP10-LQ 10 W solar panel, SP20-LQ 20 W solar panel |
The RAWS-P typically communicates using our GOES satellite transmitter. It is compatible with other communication equipment such as telephones, digital cellular transceivers, and radios.
Number of FAQs related toRAWS-P:1
Campbell Scientific offers several software options, which are outlined below:
We've updated our privacy policy.了解更多