RAD10E10-Plate Solar Radiation Shield for Larger Sensors

Ordering Info Ask a Question Ask a Question

Images
Detailed Description
Specifications
Compatibility
Articles
Associations

Overview

TheRAD10E, manufactured by MetSpec, is attached to a Campbell Scientific crossarm or mast. The RAD10E uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. This shield also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2 m s^-1(~ 4.5英里每小时))a better measurement.

Improved sensor protection from driving rain, snow, and insect intrusion
Lower self-heating

Images

RAD10E

Section view of RAD10E and EE181-L (sold separately)

RAD10E and EE181-L attached to mounting pole (all sold separately)

Detailed Description

The RAD10E 10-Plate Solar Radiation Shield houses the EE181-L Temperature and Relative Humidity Probe. The probe fits in the bottom of the shield and is held in place with a foam-lined gland that tightens down around the probe.

The RAD10E includes a 5.08 cm (2 in.) U-bolt with a plastic V-block. The U-bolt is placed in the holes on the side of the bracket for attachment to a mast or vertical pole. The U-bolt is placed in the holes on the bottom of the bracket for attachment to a crossarm.

Specifications

Construction	UV-stabilized white thermoplastic plates, aluminum mounting bracket, white powder-coated stainless-steel U-bolt clamp
Plate Diameter	12.3 cm (4.84 in.)
Height	20.8 cm (8.19 in.)
Weight	1.01 kg (2.23 lb)