Services Available | |
---|---|
Repair | Yes |
校准 | 不 |
Free Support | Yes |
The PVS5120C is a composite sampler that deposits its water samples into a nine-liter container. This sampler uses a vacuum sampler controller, the VSC100, to allow a Modbus RTU client, SDI-12 client device, simple pulse input, or Campbell Scientific PakBus data logger to control and communicate with the water sampler.
This sampler is lightweight, portable, and battery-powered. It can fit in a small-sized manholeand be suspended by a stainless-steel harness for sewer applications.
PVS5120C可与标准或大型泵一起使用。标准泵以1.6 m / s(5.1ft / s)的样品为7.6米(25英尺)的水平绘图。大型泵在7.6米(25英尺)的2.2m / s(7.1ft / s)下采样。这些速度都是海平面测量的典型值。随着高度的增加,进气速度将减少。
Read MoreThe PVS5120C uses an external vacuum pump to draw water through intake tubing, instead of the traditional peristaltic pump that induces flow by squeezing flexible tubing. Because the vacuum method disturbs the water samples less, they better represent the original water solution, especially if the solution has high concentrations of supsended solids.
为了防止交叉污染,采样器使用气压(最多28psi)来吹扫多余水的管道。标准泵可以高达大型泵,适用于大多数应用 - 特别是当电力预算是一个问题时。大型泵适用于长软管距离或高升降机的应用,因为它提供了更高的泵送速度。
Specialized Applications | Fits in small-sized manholes. Can be suspended by stainless-steel harness for sewer applications. |
5/8 Inch ID Tubing Compatible | Yes |
样本容器 | 一瓶9瓶 |
外壳 | LLDPE (linear low-density polyethylene), three-piece construction, and stainless-steel fittings |
Cooling System | Insulated container wall, cavity space for ice |
Horizontal Velocity | 参考“PVS5120进气速度与海平面的软管长度”图. |
Storage Temperature Range | -20°至+ 50°C |
Operating Temperature Range |
|
工作电压 |
|
Body Case Diameter | 42.8 cm (16.85 in.) |
高度 |
|
Weight |
|
Sampler with Standard Pump and No Battery | 10.4 kg (23 lb) |
采样器带大型泵,没有电池 | 11.8 kg (26 lb) |
7 Ah Battery | 1.8 kg (4 lb) |
17 AH电池 | 6.3 kg (14 lb) |
Controller |
|
采样器触发方法 |
|
RS-485 Communication | 通过脉冲或基于时间的控制触发样本时可以返回采样器状态。 |
Backup Power Source | 内部锂电池在电源故障时维护程序设置和信息。 |
多功能按钮 | Service sampler, collect manual sample, and auto deploy |
自动部署 | 根据软管长度(25到100英尺之间)自动设置吹扫和真空时间 |
Sampler Status/Feedback | Bottle number, sample number, response code, sampler battery voltage (available after every sample) |
Vacuum System |
|
Pinch Valve | Fixed – normally open |
Purge Cycle | Adjustable from 1 to 800 s (280 s for SDI-12) |
Suction Cycle | Variable (until liquid contacts level electrode in metering chamber or adjusts automatically to two times the purge time) |
水平最大传输距离 | 67米(220英尺) |
计量室覆盖 |
|
Volume Control Tube | 316 stainless steel |
Metering Chamber Level Electrode | 316 stainless steel |
Intake Hose | Ordered as a common accessory. Campbell Scientific offers PVC hose with 25-ft and user-specified lengths. Intake end can have a lead sinker or stainless-steel strainer. Sampler end can have a clamp or quick-connect termination. |
Discharge Hose Material |
|
PVS5120C可以与其他制造商的Campbell科学数据记录器连接或RTU。
我们的数据记录器可以与几乎任何浊度,水位或水平的传感器进行界面和通信,以及根据时间,事件或测量条件控制采样器。
Example CR1000 programs for triggering a PVS5120 that has been configured to run on SDI12 commands, PakBus commands or ModBus commands.
We've updated our privacy policy.Learn More