NL116Ethernet Interface and CompactFlash Module

Ordering Info Ask a Question Ask a Question

RETIRED ›
This product is no longer available.

NL116 Ethernet Interface and CompactFlash Module

Services Available
Repair	Yes
Free Support	Yes

Overview

Ethernet connectivity and expanded data storage capacity are easily added to a CR1000 or CR3000 by attaching an NL116. The Ethernet connection provides access to the powerful Internet capabilities of the data logger for data collection and control. Additionally, gigabytes of data and file storage capacity can be added to the data logger using a removable CompactFlash card.

Provides a native Ethernet connection, allowing the data logger to communicate directly using a variety of Internet protocols
CompactFlash cards can be used to greatly expand data storage capacity
The ability to remove and swap cards makes retrieving data and files fast and simple
Integrated protection for surge and ESD
Data-logger-controlled power management for low-power operation

Images

NL116

NL116 connected directly to the peripheral port of the CR1000 (sold separately)

NL116 attached to the CR3000 (sold separately)

CAD Files:

NL116 2D (DXF)
NL116 2D (PDF)

Similar Products

NL121 Ethernet Interface

Detailed Description

Data Storage on CompactFlash Cards

One Type I or Type II (CF) card fits into the NL116’s card slot. Campbell Scientific offers and recommends the CFMC256M, CFMC2G, and CFMC16G CF cards (seeOrdering Information). Only industrial-grade CF cards should be used with our products. Although consumer-grade cards cost less than industrial-grade cards, the consumer-grade cards are more susceptible to failure, resulting in both the loss of the card and its stored data. Industrial-grade cards also function over wider temperature ranges and have longer life spans than consumer-grade cards.

The NL116/CF card combination can be used to expand the data logger’s memory, transport data/programs from the field site(s) to the office, and upload power up functions. The computer can read the CF card with the computer’s USB port and the 17752 Reader/Writer.

Specifications

Transmission Distance or Area	Worldwide
Storage Capacity	256 MB, 2 GB, or 16 GB
Data Logger Interface	40-pin peripheral port on CR1000 or CR3000
Ethernet	10/100 Mbps, auto-detect 10BaseT/100Base-TX, full/half duplex, IEEE 802.3, auto MDI/MDI-X
CompactFlash Cards	Campbell Scientific recommends industrial-rated cards.
Power Source	12 V from data logger 40-pin peripheral port
Power Consumption	58 mA typical, 3 mA Ethernet off
Temperature Range	-40° to +70°C (standard) -40° to +85°C (extended)
Service Requirements	Ethernet access
Dimensions	10.2 x 8.9 x 6.4 cm (4.0 x 3.5 x 2.5 in.)
Weight	154 g (5.4 oz)

Compliance
Application of Council Directive(s)	2004/108/EC Electromagnetic Compatibility Directive (EMC)
Product Standard	EN 61326-1:2013 – Electrical Equipment for measurement, control and laboratory use (EMC requirements – for use in industrial locations)
2011/65/EU	The Restriction of Hazardous Substances Directive (RoHS2)

Compatibility

Data Logger Requirements

A CR1000 or CR3000dataloggerusing operating system version 28 or greater is required.

Documents

Videos & Tutorials

Hughes 9502 Inmarsat BGAN Satellite IP Terminal- 13:08

经常问什么estions

Number of FAQs related toNL116:2

What is the difference between the NL121 and the NL116?

The NL116 is the same as the NL121, with the addition of a CompactFlash card slot that can be used with a removable CompactFlash card to extend data storage and data collection.
What is the recommended cable length between an NL device and an Ethernet repeater, hub, switch, or router?

The maximum recommended segment length (length of cable between the NL device and the Ethernet repeater, hub, switch, or router it is connected to)10 base - t和100年base-tx网络使用CAT5e cable is 100 m.