RETIRED ›
该产品不再可用,已被以下内容所取代:CS475A-L.
CS477-L雷达水位传感器
可用服务
维修 是的
Calibration No
Free Support 是的

概述

The CS477 is a radar-ranging sensor that monitors water level of rivers, lakes, tidal seas, and reservoirs. It can measure distances up to 70 meters. The CS477 outputs a digital SDI-12 signal to indicate distance and stage. This output can be read by many of our data loggers.

阅读更多

Benefits and Features

  • FCC approved for outdoor use (FCC ID number MOIPULS616263)
  • 由于腐蚀,污染,与洪水相关的碎片,闪电或故意破坏,潜水传感器可能损坏区域的理想选择
  • 兼容的with most Campbell Scientific data loggers
  • Low maintenance—no moving parts significantly reduces maintenance cost and time
  • 低功耗
  • 足够的苛刻环境 - Nema评分4倍
  • 宽工作温度范围(-40°至+ 80°C)

产品模型上的“-L”表示在订单时指定了电缆长度。


图片

Detailed Description

CS477发出短微波脉冲,然后测量脉冲的发射和返回之间的经过时间。经过的时间测量用于计算传感器和目标之间的距离(例如,水,谷物,浆料)。然后可以使用距离值来确定深度。

规格

遵守 FCC批准用于户外使用(FCC IC编号M01PULS616263)
Measurement Range 400毫米至70米(16英寸至230英尺)
Accuracy 在整个测量范围内±15 mm(±0.6英寸)
Resolution 1毫米(0.04英寸)
Output Options SDI-12.
Radar Frequency 〜26 GHz
电磁兼容 发射到EN 61326;电气设备B类
Pulse Energy 1 MW(最大)
Beam Angle
Input Voltage 9.6 to 16 Vdc
浪涌保护 1.5 kva.
温度敏感性
  • 平均T.K.is 2 mm/10 K
  • 最多5毫米(在-40°至+ 80°C的整个温度范围内)
抗振 Mechanical vibrations with 4 g and 5 to 100 Hz
住房额定值 NEMA 4x
筑屋材料 Aluminum, coated IP66/68
Horn Material 316L stainless steel
Typical Sleep Current Drain 4.。7 mA (with 12 V power supply)
Typical Measurement Current Drain 14 mA(带12 V电源)
侧帽直径 8.6 cm (3.4 in.)
端盖直径 8.6 cm (3.4 in.)
喇叭直径 9.5厘米(3.7英寸)
Horn Length 43.0厘米(16.9英寸)
头宽度 13 cm (5 in.)
总长度 58.5 cm (23 in.)
重量 4.3千克(9.4磅)

兼容性

笔记:The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

数据记录器

产品 兼容的 笔记
21X(退休)
CR10(退休)
CR1000(退休)
CR10X.(退休)
CR200X(退休)
CR206x.(退休)
CR211X(退休)
CR216x.(退休)
CR23x.(退休)
CR295x.(退休)
CR300
CR3000
CR500(退休)
CR5000.(退休)
CR510(退休)
CR800.
CR850
CR9000(退休)
CR9000X(退休)

经常问的问题

与之相关的常见问题解答数量CS477-L.4.

Expand AllCollapse All

  1. 是的。在里面|水平和流量文件夹,有选择选择CS475 / CS476 / CS477雷达水位传感器。单击以将选择移动到选择设备窗口,并输入SDI-12地址。

  2. 大多数坎贝尔科学传感器可作为-L提供,表示用户指定的电缆长度。如果传感器被列为-LX模型(其中“x”是其他字符),则该传感器的电缆具有用户指定的长度,但它终止具有唯一系统的特定连接器:

    • -LC模型具有用户指定的电缆长度,用于连接到ET107,CS110或REDIED METDATA1。
    • An –LQ model has a user-specified cable length for connection to a RAWS-P weather station.

    如果传感器在主型号之后没有-L或其他-LX指定,则传感器具有设定的电缆长度。电缆长度在产品订购信息中的描述字段的末尾列出。例如,034B-ET模型的描述描述了“Met One Wind for Et Station,67英寸电缆。”。产品具有集合电缆长度终止,作为默认尾纤。

    If a cable terminates with a special connector for a unique system, the end of the model number designates which system. For example, the 034B-ET model designates the sensor as a 034B for an ET107 system.

    • -et模型与ET107气象站的连接器终止。
    • etm模型终止与连接器等107 weather station, but they also include a special system mounting, which is often convenient when purchasing a replacement part.
    • –QD models terminate with the connector for a RAWS-F Quick Deployment Station.
    • –PW models terminate with the connector for a PWENC or pre-wired system.
  3. Not every sensor has different cable termination options. The options available for a particular sensor can be checked by looking in two places in the Ordering information area of the sensor product page:

    • Model number
    • Cable Termination Options list

    If a sensor is offered in an –ET, –ETM, –LC, –LQ, or –QD version, that option’s availability is reflected in the sensor model number. For example, the 034B is offered as the 034B-ET, 034B-ETM, 034B-LC, 034B-LQ, and 034B-QD.

    All of the other cable termination options, if available, are listed on the Ordering information area of the sensor product page under “Cable Termination Options.” For example, the 034B-L Wind Set is offered with the –CWS, –PT, and –PW options, as shown in the Ordering information area of the 034B-L product page.

    笔记:随着较新产品的添加到我们的库存中,通常,我们将在单个传感器模型下列出多个电缆终端选项,而不是创建多个型号。例如,HC2S3-L具有用于将其连接到CS110的-C电缆终端选项,而不是提供HC2S3-LC模型。

  4. 许多坎贝尔科学传感器可提供不同的电缆终端选项。这些选项包括以下内容:

    • The –PT (–PT w/Tinned Wires) option is the default option and does not display on the product line as the other options do. The cable terminates in pigtails that connect directly to a data logger.
    • 在-c(-c w / et / cs110连接器)选项中,电缆终止于连接到CS110电场仪表或ET系列气象站的连接器中。
    • 在里面–CWS (–CWS w/CWS900 Connector) option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows the sensor to be used in a wireless sensor network.
    • 在里面–PW (–PW w/Pre-Wire Connector) option, the cable terminates in a connector that attaches to a prewired enclosure.
    • 在里面–RQ (–RQ w/RAWS Connector) option, the cable terminates in a connector that attaches to a RAWS-P Permanent Remote Automated Weather Station.

    笔记:电缆终端选项的可用性因传感器而异。例如,传感器可能没有,两个或多个选项可供选择。如果没有为特定传感器列出所需的选项,请联系Campbell Scientific进行帮助。

实例探究

特拉华河:桥梁健康
Delaware River: Bridge Health
智能基础设施系统,宾尼尼公司,签约设计并安装有效的结构健康......read more

文章和新闻稿

Privacy Policy Update

我们更新了我们的隐私政策。了解更多

Baidu