Services Available |
---|
CS475是一种雷达测距传感器,可监测河流,湖泊,潮汐海洋和水库的水位。它可以测量高达20米的距离。CS475输出数字SDI-12信号以指示距离和级。我们的许多数据记录器都可以读取SDI-12信号。
Read MoreThe "-L" on a product model indicates that the cable length is specified at the time of order.
The CS475 emits short microwave pulses and then measures the elapsed time between the emission and return of the pulses. The elapsed time measurement is used to calculate the distance between the sensor and the target (e.g., water, grain, slurry). The distance value can then be used to determine depth.
Compliance | FCC approved for outdoor use (FCC IC number M01PULS616263) |
测量范围 | 50毫米至20米(2英寸至65英尺) |
准确性 | ±5 mm (±0.2 in.) over entire measurement range |
解决 | 1 mm (0.04 in.) |
输出选项 | SDI-12 |
雷达频率 | ~26 GHz |
Electromagnetic Compatibility | Emission to EN 61326; Electrical Equipment Class B |
脉冲能量 | 1 mW maximum |
光束角度 | 10° |
输入电压 | 9.6到16 VDC |
Surge Protection | 1.5 KVA |
Operating Temperature Range | -40°至+ 80°C |
Temperature Sensitivity |
|
Vibration Resistance | 机械振动,4克和5至100 Hz |
Housing Rating | NEMA 4X. |
Housing Material | 铝,涂层IP66 / 68 |
喇叭材质 | PVDF encapsulated plastic |
典型的睡眠电流排水 | 4.7 mA(带12 v电源) |
典型的测量电流漏极 | 14 mA (with 12 V power supply) |
Side Cap Diameter | 8.6厘米(3.4英寸) |
End Cap Diameter | 8.6厘米(3.4英寸) |
Horn Diameter | 7.5 cm (3 in.) |
Head Width | 11厘米(4.3英寸) |
喇叭长度 | 13.7厘米(5.4英寸) |
Total Length | 26.6厘米(10.5英寸) |
Weight |
|
Note:以下显示了显着的兼容性信息。它不是所有兼容或不兼容产品的全面列表。
Product | Compatible | Note |
---|---|---|
21X.(retired) | ||
CR10(retired) | ||
CR1000.(retired) | ||
CR10X(retired) | ||
CR200x.(retired) | ||
CR206X(retired) | ||
CR211x.(retired) | ||
CR216X(retired) | ||
CR23X(retired) | ||
CR295X(retired) | ||
CR300. | ||
CR300.0 | ||
CR500.(retired) | ||
CR500.0(retired) | ||
CR510(retired) | ||
CR800 | ||
CR850 | ||
CR9000(retired) | ||
CR9000x.(retired) |
Number of FAQs related toCS475-L:4
展开全部全部收缩
Yes. In the水|水平和流量folder, there is the option to selectCS475/CS476/CS477 Radar Water Level Sensor. Click to move the selection to theSelected设备窗口,并输入DI-12 address.
Most Campbell Scientific sensors are available as an –L, which indicates a user-specified cable length. If a sensor is listed as an –LX model (where “X” is some other character), that sensor’s cable has a user-specified length, but it terminates with a specific connector for a unique system:
If a sensor does not have an –L or other –LX designation after the main model number, the sensor has a set cable length. The cable length is listed at the end of the Description field in the product’s Ordering information. For example, the 034B-ET model has a description of “Met One Wind Set for ET Station, 67 inch Cable.” Products with a set cable length terminate, as a default, with pigtails.
如果电缆用特殊连接器终止用于唯一系统,则型号的末尾指定哪种系统。例如,034B-ET模型将传感器指定为ET107系统的034B。
并非每个传感器都有不同的电缆终端选项。可以通过在传感器产品页面的“排序信息”区域中查看两个位置来检查特定传感器的选项:
如果在-ET中提供传感器,-ETM,-LC,-LQ或-QD版本,则该选项的可用性反映在传感器型号中。例如,034b作为034b-et,034b-etm,034b-lc,034b-lq和034b-qd提供。
如果有可用的所有其他电缆终端选项将列在“电缆终止选项”下的传感器产品页面的“订购信息”区域上列出。例如,034B-L风装置具有-CWS,-PT和-PW选项,如034B-L产品页面的排序信息区域所示。
Note:As newer products are added to our inventory, typically, we will list multiple cable termination options under a single sensor model rather than creating multiple model numbers. For example, the HC2S3-L has a –C cable termination option for connecting it to a CS110 instead of offering an HC2S3-LC model.
Many Campbell Scientific sensors are available with different cable termination options. These options include the following:
Note:The availability of cable termination options varies by sensor. For example, sensors may have none, two, or several options to choose from. If a desired option is not listed for a specific sensor, contact Campbell Scientific for assistance.
We've updated our privacy policy.Learn More