Batteries/ BP24
BP24 24 Ah 12 V Sealed Rechargeable Battery

Overview

The BP24 is a rechargeable 12 Vdc, 24 Ah battery pack that can power a Campbell Scientific system. It is intended for high-current-drain systems, such as satellite transmitters, that require more power.

Read More

Images

Detailed Description

BP24需要调节充电源(provided by the CH150 or CH200 regulator connected to an unregulated solar panel or a wall charger). The BP24 includes a 24 in. attached cable that terminates in a connector for attaching the battery to a CH150 or CH200 regulator. The BP24 also comes with a 24 in. cable for use with the CR6 datalogger or other products that need a pigtail termination instead of a white connector. (This cable is bagged and taped to the battery.) Switching the standard cable for the pigtail cable is easily accomplished by the user. The BP24 is shipped with a bracket that secures the BP24 to an enclosure backplate. An ENC16/18 enclosure is recommended.

Specifications

-NOTE- Usable length of the red and black power leads extends at least 20 cm (8 in.) past the white cable tie tab.
Battery Type Sealed lead acid (SLA)
UL Approval File Number MH16464
Output Voltage 12 Vdc
Nominal Rating 24 Ah
Battery Cables Length 0.6 m (2 ft)
Dimensions
  • 16.5 x 17.5 x 12.5 cm (6.5 x 6.9 x 4.9 in.) for battery only
  • 21.3 x 17.7 x 13.0 cm (8.4 x 7.0 x 5.1 in.) battery with mounting bracket
Weight 10.2 kg (22.4 lb)

Compatibility

Note:The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Mounting Equipment

Product Compatible Note
ENC10/12
ENC10/12R
ENC12/14
ENC14/16
ENC16/18
ENC24/30
ENC24/30S

Miscellaneous

Product Compatible Note
34029
34031

Videos & Tutorials

Frequently Asked Questions

Number of FAQs related toBP24:12

Expand AllCollapse All

  1. The discrepancy is not a mistake—the bracket is intentionally designed to be shorter than the battery. When mounted inside an enclosure, the back of the battery rests against the mounting grommets. The lid to the mounting bracket compresses the battery slightly, holding the battery firmly in place.

  2. Yes. The BP24 Mounting Bracket is available aspn 10073. It may be necessary to purchase fourpn 505screws and fourpn 6044grommets to mount the bracket to the enclosure’s backplate.

  3. Campbell Scientific recommends keeping the BP24 in an enclosure to protect the terminal from rain and condensation that could short out the battery.

  4. Check with the airline. Mention that the BP24 is a sealed, valve-regulated VRLA AGM battery.

  5. No. The CH100 is designed to charge a 12 Vdc battery pack, not a 24 Vdc battery pack.

  6. Data loggers require stable power supplies to work properly, such as the BP24. If the system is needed for a long-term application, recharge the battery frequently, or recharge it daily with a solar panel of the appropriate size.

  7. We do not offer a battery test kit. However, theCH200charge regulator does have some features that could aid in discovering a bad battery, such as the ability to measure amperage into and out of the battery. Campbell Scientific recommends taking a voltmeter into the field to verify the battery voltage at different points to see if a dirty or corroded connection is causing a voltage drop in the system.

  8. The BP24 should never be connected directly to an unregulated solar panel. A voltage regulator, such as the CH100, must be included in the circuit, or damage to the battery will occur.

  9. Not quite. The PS24 consists of a 24 Ah battery, a CH100 regulator, and a 10 by 12 in. environmental enclosure. Aside from the enclosure, the PS24 is very similar to a BP24 combined with a CH100.

  10. Yes. Contact Campbell Scientific for a copy.


Privacy Policy Update

We've updated our privacy policy.Learn More

Baidu