The A150 desiccated case is a small, self-contained junction box that allows a sensor to be connected to a continuation cable, a prewired-enclosure connector, or a CWS900 wireless-sensor connector.
Read MoreThe A150 consists of a terminal block mounted inside of junction box. A small vent is located on the bottom of the box. The vent includes a filter, which prevents moisture and contaminants from entering the unit while equalizing the interior air pressure to the current atmospheric pressure.
A150提供安装支架紧固it to an enclosure backplate. Alternatively a Velcro strap is included for mounting the A150 onto a user-supplied structure.
Temperature Range | -30º to +65ºC |
Internal Protection Rating | IP 66 (International Standard IEC 60529) |
Terminal Block Wire Gages | 28 to 12 AWG |
Compression Fitting | Fits sensor cables with 4.6 to 7.9 mm (0.181 to 0.312 in.) diameters |
Dimensions | 8.0 x 8.2 x 5.5 cm (3.15 x 3.228 x 2.171 in.) |
The A150 is compatible with most sensors using six wires or less. Sensors with multiple ground wires can use the included 5-position lever nut to combine the grounds into a single wire connection. The A150 is often used with pressure transducers.
The -CWS cable termination option is used to connect the A150 to a CWS900-series interface, which allows the sensor to be part of a wireless sensor network. The CWS900-series interface is compatible with sensors that measure analog voltages, frequency, and pulse. The CWS900 series can also provide excitation voltage to a sensor through the A150.
The -PW cable termination option allows the A150 to be attached to a prewired enclosure. Prewired enclosures combine flexibility with ease of use.
We've updated our privacy policy.Learn More