Overview
The 31332 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with a BNC antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector. This kit includes:
- RF protector with hardware, suitable for 100 to 512 MHz
- Flange mounting bracket
- 18 in. Type N to BNC coaxial jumper
- 24 in. ground wire assembly
Note: For a pre-installed, bulkhead-mounted version of this same kit, see the31330 Bulkhead Surge Protection Installed in Enclosure, Type N to BNC, 100 to 512 MHz.
Images
Similar Products
Specifications
Coaxial Jumper |
|
| Connector 1 | Type N plug |
| Connector 2 | BNC plug |
| Cable Type | RG174/U |
| Length | 45.7 cm (18 in.) |
Surge |
|
| Performance Design | Superior coil inductor surge performance design |
| Weatherproof | Weatherproof when installed |
| Frequency | 100到512 MHz |
| Connectors | Type N jack |
| Mounting | Bulkhead or flange mount |
| Operation | DC block (RF only) |
| Insertion Loss | < 0.1 dB |
| Maximum Surge |
|
| Temperature | -50° to +85°C |
| Standards | CE compliant, RoHS compliant, IEC 60529 IP67, Bellcore #TA-NWT-000487 |
| Type N Connector Length | 2.41 cm (0.95 in.) |
| Dimensions | 9.27 x 7.16 x 3.55 cm (3.65 x 2.82 x 1.40 in.) |
| Weight | 226.8 g (0.5 lb) |
Flange Mount |
|
| Material | Aluminum with stainless-steel screws, nuts, and washers |
| Dimensions | 3.81 x 2.54 x 2.85 cm (1.5 x 1.0 x 1.12 in.) |
Ground Wire |
|
| Wire Type | 12 AWG stranded with PVC jacket |
| Connector | 5/8 crimp ring lug, soldered |
| Length | 61 cm (24 in.) |
Compatibility
Note:The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
Listed Under
Other Accessoryfor the following products:
This Product Replaced
Privacy Policy Update
We've updated our privacy policy.Learn More