The 31326 is a GPS RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a GPS receiver with an SMA antenna connection. The other side connects to the GPS antenna/antenna coaxial cable with Type N connector. The surge protector passes up to ±6 Vdc, commonly needed for active GPS antenna applications. This kit includes:
Note: For a pre-installed, bulkhead-mounted version of this same kit, see the31324 Bulkhead Surge Protection Installed in Enclosure, GPS Antenna Type N to SMA.
Coaxial Jumper |
|
Connector 1 | Type N plug |
Connector 2 | SMA plug |
Cable | RG174/U |
Length | 45.7 cm (18 in.) |
Surge |
|
Voltage | 经过医生的±6伏直流S receiver to powered/active GPS antenna. |
Frequency | 800 to 2500 MHz |
Connectors | Type N jack |
Mounting | Bulkhead or flange mount |
Insertion Loss | < 0.1 dB |
Maximum Surge |
|
Turn on Time | 4 ns (for 2 kV/ns) |
Temperature | -50° to +85°C |
Standards | CE compliant, RoHS compliant, IEC 60529 IP67, Bellcore #TA-NWT-000487 |
Type N Connector Length | 2.41 cm (0.95 in.) |
Dimensions | 9.27 x 7.16 x 3.55 cm (3.65 x 2.82 x 1.40 in.) |
Weight | 226.8 g (0.5 lb) |
Flange Mount |
|
Material | Aluminum with stainless-steel screws, nuts, and washers |
Dimensions | 3.81 x 2.54 x 2.85 cm (1.5 x 1.0 x 1.12 in.) |
Ground Wire |
|
Wire Type | 12 AWG stranded with PVC jacket |
Connector | 5/8 crimp ring lug, soldered |
Length | 61 cm (24 in.) |
The 31326 is compatible with the following products:
We've updated our privacy policy.Learn More