Services Available | |
---|---|
Repair | 是的 |
校准 | 不 |
Free Support | 是的 |
The 05106-LC is a marine version of R. M. Young Company's 05103 Wind Monitor; its bearings are sealed to better resist the salt and sand of the maritime environment. The 05106 measures wind speed with a helicoid-shaped, four-blade propeller. Wind direction is sensed by the orientation of the fuselage-shaped sensor body, which is connected to an internal potentiometer.
Read MoreThe "-LC" version of this product terminates in a connector (instead of pigtails) for use with a CS110 Electric Field Meter or MetData1 Weather Station. The length of the cable is specified at the time of order.
05106风监测器MA由不锈钢和阳极氧化铝配件的刚性UV稳定的热塑性塑料制成。热塑性材料抵抗海洋环境和大气污染物的腐蚀。它使用不锈钢精密级滚珠轴承,用于螺旋桨轴和立式轴承。
为了使其在海上和海洋应用中更耐用,05106具有防水轴承润滑剂和密封的重型电缆尾纤,而不是标准接线盒。
The 05106 measures wind speed with a helicoid-shaped, four-blade propeller. Rotation of the propeller produces an ac sine wave that has a frequency directly proportional to wind speed. The ac signal is induced in a transducer coil by a six-pole magnet mounted on the propeller shaft. The coil resides on the non-rotating central portion of the main mounting assembly, eliminating the need for slip rings and brushes.
通过机身形状的传感器主体的方向来感测风向,该传感器主体连接到内部电位器。数据记录器将已知的精密激励电压应用于电位计元件。输出是与方位角成比例的模拟电压信号。
工作温度 | -50°至+ 50°C(假设非升高条件) |
安装管道描述 | 34 mm(1.34英寸)OD 标准1.0-in。IPS时间表40. |
主壳体直径 | 5厘米(2.0英寸) |
螺旋桨直径 | 18 cm (7.1 in.) |
Overall Height | 37厘米(14.6英寸) |
总体长度 | 55 cm (21.7 in.) |
重量 | 1.5千克(3.2磅) |
Wind Speed |
|
范围 | 0至100 m / s(0到224英里/小时) |
准确性 | ±0.3 m/s (0.6 mph) or 1% of reading |
起始门槛 | 1.1 m / s(2.4英里/小时) |
距离常数 | 2.7米(8.9英尺)恢复63% |
Output |
|
Wind Direction |
|
机械范围 | 0 to 360° |
电力范围 | 355°(打开5°) |
准确性 | ±3° |
起始门槛 | 1.1 m / s(2.4英里/小时)at 10° displacement |
Damping Ratio | 0.3 |
Damped Natural Wavelength | 7.4米(24.3英尺) |
天然波长无透明的自然波长 | 7.2米(23.6英尺) |
Output |
|
力量 | Switched excitation voltage supplied by data logger |
Number of FAQs related to05106-LC:7
展开全部全部收缩
信息包含在校准表differs with each sensor. For some sensors, the sheet contains coefficients necessary to program a data logger. For other sensors, the calibration sheet is a pass/fail report.
Most Campbell Scientific sensors are available as an –L, which indicates a user-specified cable length. If a sensor is listed as an –LX model (where “X” is some other character), that sensor’s cable has a user-specified length, but it terminates with a specific connector for a unique system:
If a sensor does not have an –L or other –LX designation after the main model number, the sensor has a set cable length. The cable length is listed at the end of the Description field in the product’s Ordering information. For example, the 034B-ET model has a description of “Met One Wind Set for ET Station, 67 inch Cable.” Products with a set cable length terminate, as a default, with pigtails.
如果电缆用特殊连接器终止用于唯一系统,则型号的末尾指定哪种系统。例如,034B-ET模型将传感器指定为ET107系统的034B。
并非每个传感器都有不同的电缆终端选项。可以通过在传感器产品页面的“排序信息”区域中查看两个位置来检查特定传感器的选项:
如果在-ET中提供传感器,-ETM,-LC,-LQ或-QD版本,则该选项的可用性反映在传感器型号中。例如,034b作为034b-et,034b-etm,034b-lc,034b-lq和034b-qd提供。
如果有可用的所有其他电缆终端选项将列在“电缆终止选项”下的传感器产品页面的“订购信息”区域上列出。例如,034B-L风装置具有-CWS,-PT和-PW选项,如034B-L产品页面的排序信息区域所示。
不te:As newer products are added to our inventory, typically, we will list multiple cable termination options under a single sensor model rather than creating multiple model numbers. For example, the HC2S3-L has a –C cable termination option for connecting it to a CS110 instead of offering an HC2S3-LC model.
This depends on the information contained in the calibration sheet:
Many Campbell Scientific sensors are available with different cable termination options. These options include the following:
不te:The availability of cable termination options varies by sensor. For example, sensors may have none, two, or several options to choose from. If a desired option is not listed for a specific sensor, contact Campbell Scientific for assistance.
We've updated our privacy policy.了解更多