Soil Temperature SensorsThermocouples and thermistors

Expand All全部收缩

1. Does every sensor come with a calibration sheet?

   Not every sensor comes with a calibration sheet. If a calibration sheet is included, it is listed in the “Ships With” section of the sensor’s product web page or it is specified when ordered.

2. If the cable attached to a sensor is too short, can more cable be spliced to the existing cable to make it longer?

   Whenever possible, purchase a sensor with the desired cable length. Some sensors have a user-specified cable length, whereas other sensors have a set cable length.

   有时，旧电缆可以用新的更长的电缆替换。

   通常，额外的电缆不能拼接到现有电缆上，因为：

   • Some sensor cables have bridge completion resistors at the pigtail end
   • Some sensors are calibrated based on cable length
   • 有时绝缘中的颜色与尾纤末端可见的颜色不同
   • 根据拼接的完整性，可以引入错误或故障

   拼接电缆一起增加水可以进入电缆的可能性并导致短路，腐蚀和一些其他潜在问题，这反过来可能导致测量问题。

   由于潜在的问题，请勿在没有首先联系Campbell Scientific将传感器详细讨论传感器的任何传感器电缆。

3. 传感器电缆是否可以缩短？

   Sometimes, an old cable can be replaced with a new, shorter cable.

   有时，可以通过切断结束来缩短现有电缆。但是，这样做可能会遇到一些问题：

   • 有些传感器在尾纤末端具有桥接完成电阻。
   • 一些传感器校准长度。
   • Sometimes the color in the insulation may not be the same as that visible at the pigtail end.

   由于潜在的问题，请勿在没有首先联系Campbell Scientific将传感器详细讨论传感器的任何传感器电缆。

4. What are the different cable length choices available for Campbell Scientific sensors?

   Most Campbell Scientific sensors are available as an –L, which indicates a user-specified cable length. If a sensor is listed as an –LX model (where “X” is some other character), that sensor’s cable has a user-specified length, but it terminates with a specific connector for a unique system:

   • An –LC model has a user-specified cable length for connection to an ET107, CS110, or retired Metdata1.
   • An –LQ model has a user-specified cable length for connection to a RAWS-P weather station.

   If a sensor does not have an –L or other –LX designation after the main model number, the sensor has a set cable length. The cable length is listed at the end of the Description field in the product’s Ordering information. For example, the 034B-ET model has a description of “Met One Wind Set for ET Station, 67 inch Cable.” Products with a set cable length terminate, as a default, with pigtails.

   如果电缆用特殊连接器终止用于唯一系统，则型号的末尾指定哪种系统。例如，034B-ET模型将传感器指定为ET107系统的034B。

   • -et模型与ET107气象站的连接器终止。
   • –ETM models terminate with the connector for an ET107 weather station, but they also include a special system mounting, which is often convenient when purchasing a replacement part.
   • -QD模型终止于RAWS-F快速部署站的连接器。
   • –PW models terminate with the connector for a PWENC or pre-wired system.
5. Where are the available cable termination options listed for a particular sensor?

   Not every sensor has different cable termination options. The options available for a particular sensor can be checked by looking in two places in the Ordering information area of the sensor product page:

   • Model number
   • Cable Termination Options list

   如果在-ET中提供传感器，-ETM，-LC，-LQ或-QD版本，则该选项的可用性反映在传感器型号中。例如，034b作为034b-et，034b-etm，034b-lc，034b-lq和034b-qd提供。

   所有其他的电缆终端选项,如果艾娃ilable, are listed on the Ordering information area of the sensor product page under “Cable Termination Options.” For example, the 034B-L Wind Set is offered with the –CWS, –PT, and –PW options, as shown in the Ordering information area of the 034B-L product page.

   Note:As newer products are added to our inventory, typically, we will list multiple cable termination options under a single sensor model rather than creating multiple model numbers. For example, the HC2S3-L has a –C cable termination option for connecting it to a CS110 instead of offering an HC2S3-LC model.

6. What are the different cable termination options available for Campbell Scientific sensors?

   Many Campbell Scientific sensors are available with different cable termination options. These options include the following:

   • -pt（-pt w / tinned wirs）选项是默认选项，并在产品行上显示其他选项。电缆终止于直接连接到数据记录器的尾纤。
   • - c (- c w / ET / CS110连接器)选项,cable terminates in a connector that attaches to a CS110 Electric Field Meter or an ET-series weather station.
   • 在-wws（-cws w / cws900连接器）选项中，电缆终止于连接到CWS900系列接口的连接器中。与CWS900系列接口的连接允许传感器用于无线传感器网络。
   • 在-pw（-pw w / pre-wire连接器）选项中，电缆终止于连接到预先填充机箱的连接器中。
   • 在-RQ（-RQ W / RAWS连接器）选项中，电缆终止于连接到Raws-P永久远程自动化气象站的连接器中。

   Note:The availability of cable termination options varies by sensor. For example, sensors may have none, two, or several options to choose from. If a desired option is not listed for a specific sensor, contact Campbell Scientific for assistance.

7. Can a sensor cable be replaced?

   许多次，但并非总是，传感器的电缆可以用新电缆替换。如果原始电缆损坏或需要更改其长度，则会有用。

   If the cable is attached to the sensor using a connector, Campbell Scientific will sell a replacement cable. For example, a 05106CBL-L is a replacement cable for a 05106-L. Replacement cables are listed in the “Replacement Parts” section of the Ordering information area of the product page.

   If the cable is attached to a sensor through a user-accessible terminal block, a raw cable can be purchased to replace it. For example, to replace the cable on a 05103-L Wind Monitor, order the desired length ofpn 9721,24 AWG 3双绞线屏蔽SANTOPRENE电缆。作为另一个例子，TE525-L雨量计的原始电缆是pn 9661,22 AWG 1 Twisted Pair Shielded Santoprene Cable。

   如果电缆是传感器的组成部分，则电缆不能更换电缆，并且传感器必须返回到Campbell Scientific。落入该类别的传感器的一些示例包括107-L，109SS-L，229-L，CS547A-L和CS650-L。F或将设备退回坎贝尔科学的过程, refer to the修复和校准page.