RF321 UHF Radio Transceiver Covering 400.5 to 416.5 MHz Range
Rugged, Long Range
Long-distance option for communication
weather applications water applications energy applications gas flux and turbulence applications infrastructure applications soil applications

Overview

The RF321 is a 400.5 to 416.5 MHz radio. Campbell Scientific’s RF320-series narrowband UHF/VHF radio transceivers provide a long-distance telemetry option for communicating with remote measurement stations. Each radio includes a configured Ritron DTX-L radio, a mounting bracket, and a cable for connecting the radio to a radio modem. The different models vary by the frequency ranges they support.

Read More

Images

RF320-series radio transceiver connected to a PC

Detailed Description

The RF321 is programmed by Campbell Scientific to the frequency that was assigned by the Federal Communications Commission (FCC). This frequency must be specified at time of order so that it can be programmed into the radio.

A user-supplied antenna is required for each radio; contact Campbell Scientific for more information about selecting the antenna and cable. Each radio must also be connected to an RF500M or RF310M radio modem.

Specifications

Ritron Module DTX-445
FCC ID AIERIT17-445
Industry Canada ID 1084A-RIT17445
FCC Rule Parts 90
Industry Canada Rule Parts RSS-119
频率Range 400.5 to 416.5 MHz
RF Channels 8 independent Tx/Rx frequencies
Synthesizer Step 6.25 kHz
信道间隔 12.5 kHz
频率Stability ±1.5 PPM (-30° to +60°C)
Input Voltage 9 to 17 Vdc
Antenna Connector BNC female
Dimensions 14.5 x 7.6 x 3.5 cm (5.7 x 3 x 1.375 in.)
Weight 0.2 kg (7.3 oz)

Current Drain @ 12.5 Vdc

Receive Standby 25 mA
Transmitter
  • < 0.9 A (2 W output)
  • < 1.2 A (5 W output)

Receiver

Receiver Type 12.5 kHz narrowband
Sensitivity 0.25 μV (12 dB SINAD)
Adjacent Channel -60 dB
Receiver Attack Time < 10 ms (Tx to Rx)
Noise Squelch Sensitivity PC adjustable (factory set for -121 dBm)

Transmitter

RF Power Output 2 W or 5 W (@ 12.5 Vdc)
Duty Cycle 50% (< 13.5 V, 5 W output, 25°C)
Voice Emissions Designator 10K0F3E
Data Emissions Designator 9K8F1D, 11K0F2D, 11K0F3D
Transmitter Attack Time < 10 ms

Compatibility

Note:The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Data Loggers

Product Compatible Note
21X(retired) This data logger is only compatible if the RF500M radio modem is used.
CR10(retired) This data logger is only compatible if the RF500M radio modem is used.
CR1000(retired) This data logger is only compatible if the RF500M radio modem is used.
CR1000X This data logger is only compatible if the RF500M radio modem is used.
CR10X(retired) This data logger is only compatible if the RF500M radio modem is used.
CR200X(retired) The CR200X-series dataloggers are only compatible if the RF500M radio modem is used.
CR206X(retired) The CR200X-series dataloggers are only compatible if the RF500M radio modem is used.
CR211X(retired) The CR200X-series dataloggers are only compatible if the RF500M radio modem is used.
CR216X(retired) The CR200X-series dataloggers are only compatible if the RF500M radio modem is used.
CR23X(retired) This data logger is only compatible if the RF500M radio modem is used.
CR295X(retired) The CR200X-series dataloggers are only compatible if the RF500M radio modem is used.
CR300 This data logger is only compatible if the RF500M radio modem is used.
CR3000(retired) This data logger is only compatible if the RF500M radio modem is used.
CR310 This data logger is only compatible if the RF500M radio modem is used.
CR350 This data logger is only compatible if the RF500M radio modem is used.
CR500(retired) This data logger is only compatible if the RF500M radio modem is used.
CR5000(retired)
CR510(retired) This data logger is only compatible if the RF500M radio modem is used.
CR6 This data logger is only compatible if the RF500M radio modem is used.
CR800 This data logger is only compatible if the RF500M radio modem is used.
CR850 This data logger is only compatible if the RF500M radio modem is used.
CR9000(retired)
CR9000X(retired)

Communication Devices

Product Compatible Note
RF232(retired)
RF232A(retired)
RF232T(retired)
RF310B(retired)
RF310M(retired)
RF313(retired)
RF315M(retired)
RF500B(retired)
RF500M(retired) -PB and -AL only (no -DA)
RF95(retired)
RF95A(retired)
RF95T(retired)

常见问题

Number of FAQs related toRF321:2

  1. No. The RF500M cannot be directly interfaced with a GPS receiver. However, most Campbell Scientific data loggers can be interfaced with the output from a GPS receiver and programmed to extract the positional information. This information can then be accessed via an RF500M/RF320 RF link.

  2. It is possible to connect two antennas to a single radio via a properly specified (operating frequency and power handling capability) two-way, 50 ohm RF power divider. One example of this type of power divider is offered byPasternack. Note that using a device like this will induce additional losses into the system (3 to 4 dB, typically).


This Product Replaced

Privacy Policy Update

We've updated our privacy policy.Learn More

Baidu