RETIRED ›
This product is no longer available.
PC-OPC OPC Server (Single License)
Services Available
Free Support No

Overview

Current Version:2.1

The PC-OPC Server uses the OPC standard interface to allow third-party, OPC-compatible graphics packages to view data from the LoggerNet server. This software provides a simple browser interface that allows you to easily select the values you want to display. It also allows you to view input locations, final storage data, and LoggerNet communications server statistics, as well as perform control operations.

Read More

Benefits and Features

Images

Detailed Description

The PC-OPC Server uses a simple browse interface that:

  • Provides data via “data tags” to any SCADA or third-party software that supports OPC
  • Updates, or pushes, data to third-party software as the LoggerNet server collects it from the data logger(s)
  • Allows third-party software to set input locations, variables, ports, and flags in our data loggers

Many software and hardware products support OPC. Products that have been tested by Campbell Scientific include Iconics Genesis, Intellution IFIX, and National Instruments Lookout.

A PC-OPC trial version can bedownloadedat no charge. The trial version generates random data instead of retrieving the data.

License for Use

This software is protected by United States copyright law and international copyright treaty provisions. Installation of this software constitutes an agreement to abide by the provisions of its licensing agreement. Campbell Scientific grants you a non-exclusive license to use this software in accordance with the following:

  1. The purchase of the single license allows you to install and use a single instance of the software on one physical computer or one virtual machine only.

  2. 这个软件不能装在一个网络服务器上for the purposes of distribution or for access to the software by multiple operators. If the software can be used from any computer other than the computer on which it is installed, you must license a copy of the software for each additional computer from which the software may be accessed.

  3. If this copy of the software is an upgrade from a previous version, you must possess a valid license for the earlier version of software. You may continue to use the earlier copy of software only if the upgrade copy and earlier version are installed and used on the same computer. The earlier version of software may not be installed and used on a separate computer or transferred to another party.

  4. This software package is licensed as a single product. Its component parts may not be separated for use on more than one computer.

  5. You may make one (1) backup copy of this software onto media similar to the original distribution, to protect your investment in the software in case of damage or loss. This backup copy can be used only to replace an unusable copy of the original installation media.

This software may not be sold, included, or redistributed in any other software or altered in any way without prior written permission from Campbell Scientific. All copyright notices and labeling must be left intact.

Specifications

Current Version 2.1
Operating System Windows 7, Vista, 2000, or XP
Data Access Standard Supports Data Access Standard 2.05a only.
Requirement Licensed copy of LoggerNet or LoggerNetAdmin must be running on the same PC or a remote PC that is accessible via TCP/IP.
Purchased Separately Yes
Dimensions 12.7 x 14.0 x 0.33 cm (5.0 x 5.5 x 0.13 in.)
Weight 45.4 g (0.1 lb)

Compatibility

Note:The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Data Loggers

Product Compatible Note
21X(retired) The 21X requires three PROMs; two PROM 21X Microloggers are not compatible.
CR10(retired)
CR1000(retired)
CR1000X
CR10X(retired) LoggerNet is compatible with the mixed array, PakBus, and TD operating systems.
CR200X(retired)
CR206X(retired)
CR211X(retired)
CR216X(retired)
CR23X(retired) LoggerNet is compatible with the mixed array, PakBus, and TD operating systems.
CR295X(retired)
CR300
CR3000(retired)
CR310
CR500(retired)
CR5000(retired)
CR510(retired) LoggerNet is compatible with the mixed array, PakBus, and TD operating systems.
CR6
CR800
CR850
CR9000(retired)
CR9000X(retired)

Additional Compatibility Information

Requires a licensed copy of LoggerNet running on the same PC or a remote PC that is accessible via TCP/IP.

OPC Products

Many software and hardware products support OPC. Products that have been tested by Campbell Scientific include Iconics Genesis, Intellution IFIX, and National Instruments Lookout. PC-OPC supports Data Access Standard 2.05a only.

Computer

Minimum recommended hardware is 300 MHz Pentium II processor with 128 Mbyte of RAM and screen resolution of 800 x 600. Recommended computer operating systems are Windows Vista, 2000, and XP.

Downloads

PC-OPC德mo v.2.1 (1.1 MB)09-28-2006

Current demo version of our PC-OPC software

常见问题

Number of FAQs related toPC-OPC:5

Expand AllCollapse All

  1. The PC-OPC Server demo enables users to verify if an OPC client will work with Campbell Scientific’s OPC server. The trial version doesn't actually connect to aLoggerNetserver or provide any true data. It only provides mock data.

  2. The PC-OPC Server works with OPC Data Access Specification 2.05a.

  3. The blog article "How to Navigate the World of Software Upgrades, Patches, and Trials" explains the difference between patches (free of charge) and upgrades (for a fee). This example quickly shows the difference between an upgrade and a patch:

    Upgrade Patch

    Major version change, such as 1.3 to 2.0

    Minor version change, such as 1.3 to 1.4

    Typically requires purchase for a fee

    Free of charge

  4. If the OPC client software supports getting data from an SQL server,LoggerNet Database Software(LNDB) may be a more appropriate option than PC-OPC.LNDBstores a complete history of data tables retrieved from the data loggers in an SQL server. In contrast, PC-OPC only provides the last record from each data table in theLoggerNetcache when it is first started and any new records that are collected byLoggerNetwhile the PC-OPC Server is running. If the OPC client is storing PC-OPC data in its own database, gaps will be created (missing data) in the OPC client database if the PC-OPC Server, the OPC client, or both are not running whenLoggerNetcollects the data.

  5. Campbell Scientific data loggers cannot communicate directly with LabVIEW. However, after retrieving data collected by any of the Campbell Scientific data loggers and placing the data in theLoggerNetdata cache, the data can be shared with LabVIEW using aLoggerNetclient called PC-OPC. A trial version of PC-OPC is available in the Downloads section of the PC-OPC product page.

    The PC-OPC Server software provides a standard interface that allows third-party OPC-compatible graphics packages, including LabVIEW, to display the data logger data.

    In addition to using the PC-OPC Server and the data socket feature in LabVIEW, communication can also be established usingLoggerNet-SDKwith ActiveX controls.

Privacy Policy Update

We've updated our privacy policy.Learn More

Baidu