Overview
This lock washer is included with many of our mounts. The 4366 may be purchased to replace a lost or damaged washer.Images
Specifications
| Diameter | 0.97 cm (0.38 in.) |
| Height | 0.33 cm (0.13 in.) |
| Weight | 4.54 g (0.01 lb) |
Listed Under
Other Accessoryfor the following products:
Replacement Partfor the following products:
- 18549- CC Camera or PWD22 Mounting Kit
- CM235- Magnetic Mounting Stand
- 18098- Eppley Solar Sensor or Cellular Antenna Mounting Stand
- 32788- 5 W Solar Panel Installed in ENC8/10 Enclosure Lid (enclosure sold separately)
- CM210- Crossarm-to-Pole Mounting Kit
- CM221- Right-Angle Mounting Kit
- 19017- Enclosure Tower Mounting Kit
- ENCTDR100- Enclosure to Hold Datalogger, SDM8X50-N, and TDR200, 16 x 18 inches
- 19002- Enclosure Tripod Mast Mounting Kit
- TS100SS- Aspirated Radiation Shield
- CM225- Solar Sensor Mounting Stand
- CMB200- Crossarm Brace Kit
- 34344- MetSENS or WINDSONIC Stand Mount
- CM226- Solar Sensor Mounting Stand with Level and Base
- 31394- Fully Adjustable VU01 Mounting Kit
- CLIMAVUE50- Compact Digital Weather Sensor
- 19018- Tower Mount for RAWS Enclosure
- ENC200- Enclosure for CR200X-Series Dataloggers with 5 Cable Entry Seals
- HUB-SDM5- 5-Channel Hub for SDM Peripherals
- HUB-SDM8- 8-Channel Hub for SDM Peripherals and Power Connections
- SDMX50- 50 Ohm Coaxial Multiplexer with Enclosure
- SP5-L- 5 W Solar Panel
- SP20-LQ- 20 W Solar Panel for RAWS-P
- SP10-LQ- 10 W Solar Panel for RAWS-P
- ASPTC-L- Aspirated Thermocouple with Mounts
- WINDSONIC-LC- Gill 2-D Sonic WInd Sensor with SDI-12 Output for MetData1
- SP10R-PW- 10 W Solar Panel with Regulator for PWENC
- SP20-PW- 20 W Solar Panel for PWENC
- SP20R-PW- 20 W Solar Panel with Regulator for PWENC
- SP70-L- 70 W Solar Panel
- ENC100- Barometer Enclosure
- 30626- 3/4 in. IPS or GPS Antenna Mounting Stand
- 27065- Reference Cell and RSR Adjustable-Angle Mounting Stand
- 29354- Wi-Fi Kit for ET Stations
- RAD06- 6-Plate Solar Radiation Shield
- RAD10- 10-Plate Solar Radiation Shield for Small Sensors
- RAD14- 14-Plate Solar Radiation Shield
- SP10-PW- 10 W Solar Panel for PWENC
- 14264- NR-LITE or CNR1 Mounting Kit
- CM230——可调倾角安装工具包
- SP1.6- 1.6 Watt Solar Panel
- SP1.6-L- 1.6 Watt Solar Panel
- WINDSONIC-L- 2-D Sonic Wind Sensor
- ENCTDR- Enclosure for the Tektronix 1502B
- CM270- Rain Gage Mounting Kit for the TE525, TE525MM, or TE525WS
- CM202- 2 ft Crossarm with One CM210 Mounting Kit
- CM204- 4 ft Crossarm with One CM210 Mounting Kit
- CM206- 6 ft Crossarm with One CM210 Mounting Kit
- CM220- Right-Angle Mounting Kit
- 19016- Tripod Mast Mounts for RAWS Enclosure
- SP5- 5 W Solar Panel with Connector for ENC200 and TurfWeather Stations
- PD625- TGA Low Flow Sample Dryer
- PD200T- High-Flow Sample Dryer, 4 ft
Ships withthe following:
- CM230——可调倾角安装工具包
- CM270- Rain Gage Mounting Kit for the TE525, TE525MM, or TE525WS
- 19002- Enclosure Tripod Mast Mounting Kit
- PD625- TGA Low Flow Sample Dryer
- PD200T- High-Flow Sample Dryer, 4 ft
- CM220- Right-Angle Mounting Kit
- SP5-L- 5 W Solar Panel
- CM202- 2 ft Crossarm with One CM210 Mounting Kit
- CM204- 4 ft Crossarm with One CM210 Mounting Kit
- CM206- 6 ft Crossarm with One CM210 Mounting Kit
- ASPTC-L- Aspirated Thermocouple with Mounts
- 19017- Enclosure Tower Mounting Kit
- ENC100- Barometer Enclosure
- RAD10- 10-Plate Solar Radiation Shield for Small Sensors
- RAD06- 6-Plate Solar Radiation Shield
- RAD14- 14-Plate Solar Radiation Shield
- 27065- Reference Cell and RSR Adjustable-Angle Mounting Stand
- SP5- 5 W Solar Panel with Connector for ENC200 and TurfWeather Stations
- ENCTDR100- Enclosure to Hold Datalogger, SDM8X50-N, and TDR200, 16 x 18 inches
- 29354- Wi-Fi Kit for ET Stations
- HUB-SDM8- 8-Channel Hub for SDM Peripherals and Power Connections
- 30626- 3/4 in. IPS or GPS Antenna Mounting Stand
- CM210- Crossarm-to-Pole Mounting Kit
- CMB200- Crossarm Brace Kit
- CM221- Right-Angle Mounting Kit
Privacy Policy Update
We've updated our privacy policy.Learn More