RETIRED ›
This product is no longer available and has been replaced by:CS11-L.
CS10-L Current Transducer
Services Available
Repair No
Calibration No
Free Support No

Overview

The CS10 monitors ac current along an electrical wire for the range of 0.15 A to 200 A. It outputs a millivolt signal that many of our data loggers can directly measure.

Read More

Benefits and Features

  • Ideal applications include motor or generator load conditions, efficiency studies, intermittent fault detection, and rough submetering
  • No direct electrical connection to the electrical system

The "-L" on a product model indicates that the cable length is specified at the time of order.



Images

Detailed Description

The CS10 uses CR Magnetic's CR8459 Current Transformer to detect the ac current along an electrical wire using the magnetic field that is generated by that current. The CS10 is external to the wire jacket and has no direct electrical connection to the system.

The CS10 is recommended for measurements that do not require high accuracy, such as motor or generator load condition monitoring, efficiency studies, intermittent fault detection, and rough submetering.

Specifications

Measurement Range 0.15 to 200 A
Frequency 50 and 60 Hz
Insulation Resistance 100 MΩ (@ 500 Vdc)
High Potential 2000 V
Rated Current 200 A
Accuracy with 10 Ω Maximum Burden (resistive) Typically ±5% of actual value (with provided multiplier)
Operating Temperature Range -25° to +55°C
Case Material Polypropylene resin
Construction Epoxy encapsulated
Outer Diameter 4.8 cm (1.89 in.)
Inner Diameter 1.9 cm (0.75 in.)
Height 1.7 cm (0.67 in.)

Compatibility

Note:The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Data Loggers

Product Compatible Note
21X(retired)
CR10(retired)
CR1000(retired)
CR10X(retired)
CR200X(retired)
CR206X(retired)
CR211X(retired)
CR216X(retired)
CR23X(retired)
CR295X(retired)
CR3000(retired)
CR5000(retired)
CR5000(retired)
CR510(retired)
CR800
CR850
CR9000(retired)
CR9000X(retired)

经常问什么estions

Number of FAQs related toCS10-L:2

  1. No. The CS10-L is an ac-only sensor.
  2. Yes. Three CS10-L sensors can be connected to a data logger to measure the amperage on each of three phases.

Privacy Policy Update

We've updated our privacy policy.Learn More

Baidu