兼容的with most Campbell Scientific data loggers
概述
CMP3-L由Kipp & Zonen制造,是一个O-second-class pyranometer that monitors solar radiation for the full solar spectrum range. It produces a millivolt signal that is measured directly by a Campbell Scientific data logger. The CMP3-L can provide solar radiation measurements for a variety of meteorological applications.
阅读更多Benefits and Features
- 包括一个白色的快照太阳护罩，可降低传感器的温度
- Measures reflected solar radiation when inverted
- 在阳光直射，植物檐篷下，天空云彩和人造光线时提供测量
- 包括气泡电平和升压螺钉，消除了对单独的水平基础的需求并简化安装
- Acceptable for providing the solar radiation data used in stability estimations
- 圆顶保护热层并允许水滚下来
- 专为连续室内和室外使用而设计
产品模型上的“ -l”表示电缆长度在订单时指定。
图片
Detailed Description
CMP3-L用圆顶保护的高质量黑色热层来测量太阳辐射。变黑的热层为完整的太阳光谱范围提供了平坦的光谱响应，当天空云云和反射的辐射测量值时，可以在植物的檐篷或灯下使用CMP3-L。
The CMP3-L includes a white snap-on sun shield that reduces the sensor's temperature. It also has a bubble level and adjusting leveling screws, which enable the sensor to be leveled without using a leveling base.
The CMP3-L produces a millivolt signal that is measured directly by a Campbell Scientific data logger.
可以背靠背安装两个CMP3-L金字计计，以制造低成本的重组。有关更多信息，请联系Campbell Scientific。
规格
| 传感器 | 由圆顶保护的淡化热覆盖 |
| Measurement Description | Monitors solar radiation for the full solar spectrum range |
| Spectral Range | 300 to 2800 nm |
| Maximum Irradiance | 2000 W/m2 |
| Sensitivity | 5至20 µV/w/m2 |
| 工作温度范围 | -40° to +80°C |
| 温度依赖性 | ±5% (-10° to +40°C) |
| Non-Linearity | <±2.5％（0至1000 W/m2） |
| Tilt Response | < ±2% at 1000 W/m2(±80°) |
| ISO分类 | C类（第二类） |
| Dome Diameter | 3.2厘米（1.3英寸） |
| Width | 7.9 cm (3.1 in.) |
| 高度 | 6.7厘米（2.6英寸） |
| 重量 | 600 g (1.2 lb) with 10 m (32.8 ft) cable |
兼容性
笔记：The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
数据记录仪
| 产品 | 兼容的 | 笔记 |
|---|---|---|
| 21x（退休） | ||
| CR10（退休） | ||
| CR1000（退休） | ||
| CR1000X | ||
| CR10X（退休） | ||
| CR200X（退休） | ||
| CR206X（退休） | ||
| CR211X（退休） | ||
| CR216X（退休） | ||
| CR23X（退休） | ||
| CR295X（退休） | ||
| CR300 | ||
| CR3000（退休） | ||
| CR310 | ||
| CR350 | ||
| CR500（退休） | ||
| CR5000（退休） | ||
| CR510（退休） | ||
| CR6 | ||
| CR800 | ||
| CR850 | ||
| CR9000（退休） | ||
| CR9000X（退休） |
其他兼容性信息
Mounting
CMP3-L包括气泡电平和调节水平螺钉，可以使传感器平整，而无需使用平整基础。CM225太阳能传感器安装支架通常用于将传感器连接到桅杆，横梁或极点（1.0英寸至2.1英寸的外径）。CM225由矩形板，安装支架，U螺栓，垫圈，锁垫圈和螺母组成。CMP3-L应该远离所有障碍物或反射表面，以不利影响测量。
Alternatively, the CM245 Adjustable Angle Mounting Stand may be used. It includes slots that can be adjusted to any angle from horizontal to vertical.
Documents
小册子
手册
经常问的问题
与CMP3-L：10
展开全部Collapse All
-
如果圆顶受损，请联系Campbell Scientific或Kipp＆Zonen讨论取代圆顶。传感器将需要发送到Kipp＆Zonen进行任何维修。
-
这可能是由传感器圆顶比热层温暖的条件引起的。大多数用户在晚上看到一个小的负值。这种偏移（通常称为）对于监视传感器的性能很重要。
-
No. The sensor needs to be connected to a data acquisition system, such as a Campbell Scientific data logger.
-
The CMP3-L has a passive thermopile that produces a small analog voltage that can be equated to a representative amount of incident solar radiation. Campbell Scientific recommends connecting the leads of the CMP3-L to a Campbell Scientific data logger through a differential analog input terminal.
-
大多数坎贝尔科学传感器都可以作为–L提供，该传感器表示用户指定的电缆长度。如果将传感器列为–LX模型（其中“ X”是其他字符），则传感器的电缆具有用户指定的长度，但它用特定的连接器终止了独特系统：
- An –LC model has a user-specified cable length for connection to an ET107, CS110, or retired Metdata1.
- An –LQ model has a user-specified cable length for connection to a RAWS-P weather station.
如果传感器在主型号之后没有–L或其他-LX名称，则传感器具有设置的电缆长度。电缆长度在产品订购信息中的描述字段末尾列出。例如，034B-ET型号的描述说明“遇到了一个为ET站的一组，67英寸电缆”。具有固定电缆长度的产品，默认情况下，带辫子。
If a cable terminates with a special connector for a unique system, the end of the model number designates which system. For example, the 034B-ET model designates the sensor as a 034B for an ET107 system.
- –ET模型终止于ET107气象站的连接器终止。
- –ETM models terminate with the connector for an ET107 weather station, but they also include a special system mounting, which is often convenient when purchasing a replacement part.
- –QD models terminate with the connector for a RAWS-F Quick Deployment Station.
- –PW models terminate with the connector for a PWENC or pre-wired system.
-
并非每个传感器都有不同的电缆终止选项。可以通过在传感器产品页面的订购信息区域的两个地方查看特定传感器的选项：
- Model number
- 电缆终止选项列表
如果在–ET，–ETM，–LC，–LQ或–QD版本中提供传感器，则该选项的可用性反映在传感器型号中。例如，034b以034b-et，034b-etm，034b-lc，034b-LQ和034b-qD提供。
如果有的话，所有其他电缆终止选项均在传感器产品页面的“电缆终止选项”下的“订购信息”页面上列出。例如，如034B-L产品页面的订购信息区域所示，使用–CWS，–PT和–PW选项提供034B-L风集。
笔记：由于通常将较新的产品添加到我们的库存中，因此我们将在单个传感器模型下列出多个电缆终止选项，而不是创建多个模型号。例如，HC2S3-L具有将其连接到CS110而不是提供HC2S3-LC模型的–C电缆终止选项。
-
许多坎贝尔科学传感器都有不同的电缆终止选项。这些选项包括以下内容：
- The –PT (–PT w/Tinned Wires) option is the default option and does not display on the product line as the other options do. The cable terminates in pigtails that connect directly to a data logger.
- In the –C (–C w/ET/CS110 Connector) option, the cable terminates in a connector that attaches to a CS110 Electric Field Meter or an ET-series weather station.
- In the –CWS (–CWS w/CWS900 Connector) option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows the sensor to be used in a wireless sensor network.
- In the –PW (–PW w/Pre-Wire Connector) option, the cable terminates in a connector that attaches to a prewired enclosure.
- In the –RQ (–RQ w/RAWS Connector) option, the cable terminates in a connector that attaches to a RAWS-P Permanent Remote Automated Weather Station.
笔记：电缆终止选项的可用性因传感器而异。例如，传感器可能没有，两个或几个选项可供选择。如果未列出特定传感器的所需选项，请联系Campbell Scientific寻求帮助。
-
Because of the loss of IR radiation, nearly all thermopile instruments typically have a negative offset. This offset is most easily visible at night-time, when a small negative value is read instead of zero. This same offset is present during the daytime, but it is not as visible because of the large solar signal.
另一个常见的问题涉及平整仪器。平整热电器仪器会导致直接梁组件的错误，因为余弦响应不正确。当太阳接近地平线时，这些错误更为明显，因为角度是如此浅。
-
LP02-L是由HukSeflux生产的传感器，而CMP3-L由Kipp＆Zonen制造。这两个传感器都符合第二类高金属计的ISO分类。
-
要将与无线传感器接口兼容的传感器合并到无线网络中，需要CWS900系列无线传感器接口，以及A205 CWS-TO-PC接口进行配置。
Privacy Policy Update
我们已经更新了我们的隐私政策。学到更多